All Atlantic Lighting recessed reflectors come standard with a white painted flange. You must specify the PF option (polished flange) if you want the flange to match the finish of the reflector.

Yes, bar hangers are included with new construction recessed fixtures. They are shipped loose with Architectural Grade and shipped attached on Commercial Grade. 2" to 4" VR series install with spring blades therefore no hanger bars are needed.

Yes, we often paint the flange black and we stock a Sherwin Williams medium brown color called "Toasty" for general wood ceilings. Custom colors can be done to RAL color designations.

Yes, we have a spec sheet showing the recessed reflector finishes in the Support Section area for Options. 

Yes, the 16" LHB16 is offered with optional Outrigger Arms that can be ordered with the fixture or added after a 16" Lowbay fixture is purchased. 

Yes, we have a recessed fixture with a heavy aluminum flush trim plate that secures to the frame with tamper resistant Torx head screws. The lens is secured with a complete inner ring to prevent it from being pushed up into the housing. This is technically an 8" fixture for the room needed for the tamper resistant screws in the trim to secure to the frame. But with a 6-1/2" lensed area this is comparable to other 6" fixtures. 

No, we don't sell slope adapters to be used with standard recessed downlights. We have a recessed sloped ceiling fixture. Slope adapters have historically been difficult to install and require a large diameter bowl-like trim. Our slope fixture has a small 7" aperture. See below for the SYL series 1100-3000 lumen slope fixture and the VR series high lumen slope fixture.

No, our recessed wall wash fixture is only offered in Architectural Grade. An effective wall wash requires an angled LED position that is not possible with the frame construction of the Commercial Grade. 

Yes, in the Architectural Grade VR series we have a 4" and 6" round and also a 4x4 and 6x6 square recessed adjustable accent fixture. 

We build all fixtures in our Fall River, Massachusetts factory and do not import complete fixtures. All of our Cylinder, Lowbay/Highbay, Linear and Commercial Grade Recessed fixtures meet the Buy American requirements of the American Recovery and Reinvestment Act (ARRA) section 1605. Because we don't assemble the Canadian made hanger bars to our Architectural Grade Recessed fixture, this accessory needs to be an exception.